 |
|
 |
 |
|
110mm ROUND CLASSIC AUDIOPHILE TRUE RIBBON SOLD IN MATCHED PAIRS Extremely thin Pure Aluminium 0.009mm Ribbon Diaphragm. Super strong Neodymium magnet for high efficiency. Built-in Linear Impedance conversion transformer. Incredibly flat impedance for easy crossover design. Effective from 1,700 Hz upwards due to the large diaphragm area and low self-resonance. High degree of signal fidelity and broad frequency response. Only 11mg mass for instantaneous signal response and micro-detail. Low distortion factor, good power-handling capabilities, highly linear impedance and amplitude frequency response and broad frequency response range. Flat impedance curve from 1KHz to 40KHz. This deluxe speaker range is individually factory tested and assessed then they are paired for specific efficiency and response matching. Ridged High-pressure injection moulded 5mm thick faceplate. Very competitively priced for this level of refined technology. Upgrade to the ultra high frequency response of today's audio equipment! Recommended crossover frequency 2,500Hz with -18dB Filter. The higher the crossover point, the higher the power rating of the ribbon.
Features
 |
Super strong Neodymium magnet fro high efficiency
|
 |
Build-in impedance conversion transformer
|
 |
Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance.
|
 |
Extremely thin diaphragm (0.009mm Aluminium foil) guarantees a high degree of signal fidelity and broad frequency response.
|
 |
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
|
 |
Flat impedance from 1,000 to 40,000Hz |
Specifications
| Ribbon material | Aluminium | Ribbon mass | 11mg | Ribbon dimension | 8mmx66mmx0.009mm | Ribbon area | 528 square millimetres | Gap flux | 0.6 Tesla | Gap height | 3mm | Impedance | 7Ohm | DCR | 0.02 ohm | Sensitivity | 95dB/M/W | Frequency response | 1,700~40,000Hz | Resonance frequency | 220Hz | Power handling | 14W Normal 40W Max | Recommended crossover frequency | 2,500Hz with –18dB |

|
|
|
 |